IRRSAR
+86-513-6887 7889
中文
English
Русский
PRODUCTS
SCOTCH YOKE
SCOTCH & YOKE
ACTUATORS
-The inner surface of the cylinder or hydraulic cylinder is sprayed with
PTEF, which generates resistance and lubrication in advance.
- The double seal of o-ring and slide guide prevents metal friction
between piston and cylinder.
- A secure spring locking mechanism prevents spring module and
drive module from detaching.
RACK & PINION
RACK & PINION
ACTUATORS
- Double piston rack and pinion design features compact construction,
symmetrical mounting position, high cycle life and fast operation.
- The piston rack and pinion shafts are accurately positioned, low gap,
and operate in an overall efficient manner resulting in maximum fully
machined teeth.
PISTON TYPE
PISTON TYPE
ACTUATORS
- The cylinder piston is designed with an annular groove filled with
grease leading to the gap between the sealing ring and the guide
ring.
- The sealing ring and the guide ring ensure that even if the cylinder
piston rod is subjected to a lateral force, the metal surface of the
piston and the inner wall of the cylinder will not directly rub.
- The spring is separated from the pressure member and the spring
force is output through an additional thrust guide.
DIAPHRAGM
DIAPHRAGM
ACTUATORS
- The linearity between the loading pressure and the stroke is good,
and the molded diaphragm moves in the deeper membrane cover,
minimizing the variation of the membrane area over the entire stroke
range.
- It has good dynamic stability and frequency response ability.
MULTI-TURN
MULTI-TURN
ACTUATORS
-The cam ring with a special curve makes each plunger reciprocate
multiple times during one revolution of the shaft, thereby pushing the
plunger to rotate.
-The inner curve has low speed and large torque, compact structure,
sturdy and durable, and can be used for forward and reverse rotation.
ADVANTAGES
Quarter Turn Pneumatic Actuators
Maximum torque
（Nm）
Linear Pneumatic Actuators
Maximum thrust
（KN）
Inside Actuator Diameter
（mm)
NEWS
Follow us 
